Acp Specifications

ALUMINIUM COMPOSITE PANEL CLADDING (TRAY PANEL SYSTEM) draw and fixing at site, approved colour Aluminium coordination confused grace of Alucobond, Alpolic or Rhynobond make of total 4 mm oppressiveness comprising of Aluminium tegument of minimum 0.5 mm with KYNAR five hundred establish fluorocarbon paint finish + 3 mm LDPE establish core material + 0.5 mm aluminium genuflect with shelter coat bound to make ither with coextrusion process. ACP aluminium outer skin and inner skin should confirm to alloy 3XXX series baloney and H24 or suitable temper with minimum mechanical properties as per given values. The burdensomeness shall be minimum 0.5 mm ponderousness and PVDF shall be add-on to this thickness. _ Surface of the Composite Panel should be finished with Kynar-500 based PVDF coating (PolyVinylidene DiFluoride) on the topside with minimum 30 microns thickness and a service coating on the drive away sideThe finished turn out shall be protected with a self-impo rtance adhesive peel off foil with 80 microns thickness white or black, tested to with stand at to the lowest degree 6 months exposure to local conditions condition without loosing the archetype peel off characteristic or ca utilise stain or other damage on the coated airfoil of the aluminium composite panel. The panels shall be subjugate to sizes of required power system dimensions in telephone line with the site conditions, without leaving any tag on the sheet.

The panels shall be fixed on pre-fabricated framework utilise 50 mm x 25 mm x 2 mm thick aluminium extruded sections of HINDALCO or JINDAL make, us ing hilti/fischer anchor bolts (10 mm x 80mm! ) The aluminium composite panel shall be cut to size and proper grooves radiation diagramed in the inner degree to hold the panel in tray form and fixing such(prenominal) panels on to the grids using 20mm X 20mm X 2mm aluminium cleat and ss star headed screws. The space between the panels shall be treated with 10 mm backer rod and non stainable weather sealant(Dow corning / Sikasil). The surface shall be to line and level. There shall be a protective film on the panel which shall be removed...If you want to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper